Product description,
COB RGB phantom light bar, dimming can be controlled by remote control APP, etc.
Compared with SMD's RGB light bar, the light is softer, the light is linear, the color reproduction is higher, and the visual effect is better.
5V voltage, so that this light bar can be used in car, bar, KTV, family party, festival decoration and other atmosphere creation decoration
| Lamp Body Material | Copper |
| Input Voltage(V) | DC 5V |
| Lighting solutions service | Project Installation |
| LED Quantity | 240leds/m |
| Product Colors | RGB |
| Material | Copper Wire |
| IP Grade | IP20/IP65/IP67 |
| Package | Neutral Packing |
| Power | 18W |
| PCB width | 10mm |
Product pictures,
Installation precautions
① Cob packaging colloid is directly exposed to the outside, which is made of silica gel, with soft hardness. During
installation,avoid contact with sharp objects to avoid scratching the luminous surface and affecting the luminous effect;
②Colloidal material is easy to be contaminated with dust and is not easy to handle, so when installing, pay attention to keep the
lamp belt clean. In case of dust, cotton swab can be used to stick alcohol, gently wipe.
③ Cob strip light should be installed in place at one time in the installation process, and there should be no repeated tearing
and pasting operations. Because the cob lamp strip chip is directly packaged on the PCB board, the chip size is very small, too
much tearing action will cause the cob lamp strip chip to die.
